ประวัติการทำงาน

ประสบการณ์ทำงานทั้งหมด 0 ปี

ตุลาคม 2561 ถึง กันยายน 2568

ตำแหน่ง Solution Engineer

บริษัท Siemens Mobility

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Engineering for Railway Power supply.
Running project as system electrical engineer, work closely with Siemens AG SE (System Engineering) teams, perform the calculation studies of load flow, short circuit, relay protection, harmonic study for MV, HV electrical network system, and DC protection for railway power supply system.
Project reference: Bangkok Blue line extension Bangkok (Load flow short circuit study and protection for Emergency power supply system), Bangkok Green line extension (Harmonic study, relay protection for harmonic filter plant), Singapore Circle line extension (protection concept, 3AC(22kV) and DC relay coordination study), Singapore North East line extension (protection concept, 3AC(22kV) and DC relay coordination study), Turkey IML11 line (3AC(34.5kV) relay coordination study), Norway Oslogate 3 (1AC(15kV) relay coordination study), New Zealand NIMT (Protection concept), Copenhagen Denmark Ring3 Light Rail (3AC(10kV) and DC relay coordination study), Spain Vale Truck Trolley (3AC(34.5kV) and DC relay coordination study), Singapore Train Testing Centre ITTC (protection concept, 3AC(22kV) relay coordination study), Taiwan Taoyuan Green line (DC relay protection), Kuala Lumpur International Airport for automated people mover (3AC(11kV) relay coordination study), Sydney Metro Western Sydney Airport (protection concept, 3AC(132kV,33kV) relay coordination study), Singapore Jurong Region line (Protection philosophy, 3AC(66kV, 22kV) and DC relay coordination study), Pune Metro Line III Hinjewadi–Shivajinagar (3AC(220kV, 132kV, 33kV) and DC relay coordination study), Chennai Metro Phase 2 (harmonic study), Gujarat Metro Ahmedabad phase 2 (DC relay coordination study), Norway Oslo Majorstuen (DC relay coordination study), etc.

มีนาคม 2556 ถึง กันยายน 2561

ตำแหน่ง Senior Electrical Engineer

บริษัท ThyssenKrupp Industrial Solution

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
Engineering Procurement and Construction (EPC) company on Petrochemical / Oil&Gas plant.
Running project as lead electrical engineer, supervise on all electrical issues, communicate to project team, plan and issued work on time, discussion with client, provide assistance to project engineer and project manager.
Referenced project:
1) EPC(m), Engineering (Green field) for Chang project, Rigid polyol plant at Map ta phut, Rayong, Thailand owned by DOW chemical. The electrical system is 6.3 kV SWGR, oil type distribution transformer 2 and 0.5 MVA, MCC, VSD(SIL scheme), AC-UPS & DC charger, lighting, electric heat tracing and new electrical substation. The total plant electrical equipment is 45 units.
Communication systems – fire alarm system.
2) E, Engineering (Green field) for N P K project, fertilizer plant at Phu My, Ba Ria Vung Tau, Vietnam. The electrical system is 6.6 kV SWGR power distribution, transformer 2x3.15 MVA, emergency diesel generator 750 kVA, MCC, UPS & Battery charger, VSD. The main equipment such as dryer drum 400 kW, dryer exhaust fan 400 kW, NH3 compressor 450 kW. The total plant electrical equipment 230 units.
Communication systems – Public address system, CCTV system, Radio system, Telephone system, IT infrastructure, Fire alarm system.
3) EPC, Engineering Procurement and Construction, (Brown field) for DPEX project, LDPE plant expansion at Map ta phut, Rayong, Thailand owned by Thai Polyethylene (TPE, SCG Group). The electrical system is 22 kV SWGR power distribution, oil type distribution transformer 2 MVA, 1/1.5 MVA, MCC, VSD. The main equipment such as compressor 9.9 MVA (compressor transformer 20 MVA), 3.2 MVA (existing compressor transformer 10 MVA), main extruder 1.7 MVA (extruder transformer 2 MVA), 22 MV switchgear panels and total plant electrical equipment is 80 units.
Communication systems – fire alarm system.
4) EPC(m), Engineering Procurement and Construction Management, (Green field) for Loykrathong project, New Sodium Bicarbonate plant at Map ta phut, Rayong, Thailand owned by Solvay Peroxythai. The electrical system is 22 kV SWGR, dry type distribution transformer 2 MVA, Busduct, MCC (reacceleration feature), VSD, AC-UPS & DC charger, lighting, electric heat tracing. The total plant electrical equipment is 109 units.
Communication systems – Fire alarm & firefighting monitoring system, public address system.
5) EP, Engineering and Procurement, for NHTCM project, (Brown field) upgrade of Tungsten mining plant at Nui Phao, Vietnam. The electrical system is 6.6 kV RMU, distribution transformer 2.5 MVA, MCC, VSD, AC-UPS and lighting. The total plant electrical equipments is 136 units.
6) BEP, Basic Engineering package, for project TS-VRU Product for Aker Cool Sorption. It’s the set of vapour recovery unit module comprised of LV motors, MCC, heat tracing.

มิถุนายน 2555 ถึง มีนาคม 2556

ตำแหน่ง Senior Electrical Engineer

บริษัท Thai Woo Ree Engineering

ที่อยู่บริษัท

เงินเดือน สำหรับสมาชิกเท่านั้น

ลักษณะงานที่ทำ
1) EPC for project Onshore Compressor Station #4 at Map Ta Put, Rayong, Thailand for PTT PCL. The electrical system is 115 kV GIS indoor substation, Transformer (115/11.5 kV 4x40 MVA, 11/0.4 kV 2x3000 kVA and 2x3150 kVA), 11 kV&400V switchgear, MCC, generator 1600 kW, AC-UPS&DC Charger with load synchronous motor 3 unit and induction motor 96 unit.
Coordinate and prepare for documents for Electrical Authority (PEA) electrical permit such as metering & single line diagram, logic diagram, relay setting.
Review comment schematic diagram for GIS remote control panel, 11 kV switchgear.

ประสบการณ์ทำงานอื่นๆ
4)
Date:tabDec 2009 - Feb 2012
Employer: tabUhde (Thailand) Co., Ltd.
(The company was taken over and changed the name to ThyssenKrupp Industrial Solution, referenced no.2)
Position: tabElectrical Engineer
Project Brief & ResponsibilitiestabEngineering Procurement and Construction (EPC) company on Petrochemical / Oil&Gas plant.
1)tabFEED, Front End Engineering Design, for RFCC project, Refinery plant extension at Daura, Baghdad, Iraq for Midland Refinery company (MRC), containing ISBLs (LPG, Poly Naptha, Prime G+, Hydrogen Plant), OSBLs and utilities for complex refinery plant.
Execute the project as a lead electrical engineer, communicate to project team, plan and issued work on time, discussion with client (USAPL, Uhde Australia), provide assistance to project engineer and project manager.
2)tabEPC, Engineering Procurement and Construction, for project Tail Gas Treating Unit and Amine Recovery Unit (TGTU) at IRPC Rayong, Thailand. Project area is 1000 square metre and contain motor 29 units, oil type transformer 2000 kVA 6.3 kV, 30 kVA UPS. The project purpose is to clean contaminated air before eject to environment.
Work as an electrical engineering in detail design for electrical system for specifications, single line diagram, schematic diagram, cable schedule, plant earthing & lightning protection system, hazardous area classification, technical for materials procurement, and supervision for construction work and assist to plant commissioning.
Communication system – fire alarm system, intercom system.
5.)
Date:tabMay 2007 - Mar 2008
Employer: tabEnergy Design Concept Co., Ltd.
Position: tabSolution Manager
Project Brief & ResponsibilitiestabEnergy Service Company.
Small projects for Energy Improvement for industrial and building.
Running turnkey project for energy improvement for industrial and building, including customer presentation, survey and propose for project, procurement for material, hiring contractor, supervise work, and close the project.
6.)
Date:tabSep 2006 - Apr 2007
Employer: tabGAMMA Engineering Co., Ltd.
Position: tabTechnical Sale Support
Project Brief & ResponsibilitiestabTurkey contractor on Energy business.
KAWASAKI Gas Turbine Co Generation.
Technical support for the KAWASAKI Gas Turbine Co Generation system project, responsible for presentation and technical discussion with customer, project feasibility study, prepare for technical proposal for project bidding, maintenance for KAWASAKI Gas Turbine Co Generation.
7.)
Date:
Sep 2005 - Apr 2006
Employer: tabThai Industrial Gases Pub., Co., Ltd.
Position: tabE&I Engineer
Project Brief & ResponsibilitiestabOwner of Industrial and hospital Gases plant.
Small internal projects for industrial and hospital gases plant.
Responsible for assist senior E&I Engineer for E&I engineering and project execution.

8.)
Date:tabJul 2004 - Jun 2005
Employer: tabDynamic Engineering Consultants Co., Ltd.
Position: tabElectrical Engineer
Project Brief & ResponsibilitiestabEngineering Consultants company for Suvarnabhumi Airport Project.
1)tabEngineering consultant for Airport Operation Building (AOB) at Suvarnabhumi Airport Project, Thailand. Project detail is office building 6 storeys with dry type transformer 2000 kVA 2 units, Generator 800 kW.
2)tabEngineering consultant for Airport Information & Management System Building (AIMS) at Suvarnabhumi Airport Project, Thailand. Project detail is Information & Management System building 6 storeys with dry type transformer 1600 kVA 2 units, Generator 1000 kW.
Supervision for construction work, review and approve drawing and material for electrical and communication systems, witness for test and commissioning for electrical and communication system.
9.)
Date:tabJun 1997 - Apr 2000
Employer: tabSindhu Pulsirivong Consultants Co., Ltd.
Position: tabElectrical Engineer
Project Brief & ResponsibilitiestabEngineering Consultants company.
1)tabEngineering consultant for Muang Thong Thani 13th Asian Game stadium at Bangkok, Thailand. Project detail is 12,000 seats stadium and 4 exhibition hall with dry type transformer 2500 kVA 3 units and 1600 kVA 4 units, Generator 1250 kVA 2 units.
2)tabEngineering consultant for Srinagarind-Tra-Nu-Sorn Building at Srinagarind Hospital, Khon Kaen University, Khon Kaen, Thailand. Project detail is 19 storey hospital building with dry type transformer 2500 kVA, Generator 1000 kVA.
Supervision for construction work, review and approve drawing and material for electrical and communication system, witness for test and commissioning for electrical and communication system.